High Output UV Lamp Trolley With Infrared Sensor

(Model: FY–36T/75T/120T)

Products Description:

FY-36T/75T/120T, has three pieces of 36/75/120 watts UV Lamps that Emit a High Intensity Ultraviolet Light that hits every surface in the room and kills any Microorganisms or Pathogen including MRSA, hand foot mouth disease, Colds & Flu, Pneumonia, Molds, E. coli, Salmonella, and similar type of Bacteria.

The light penetrates and destroys the actual DNA of Microorganisms. There is no known Microorganism that is Immune to UV-C energy.

Our independent research and development of reflective materials, through reflection, the intensity of the lamp tube will increase by 40%, increase the ultraviolet intensity, enhance the disinfection effect, shorten the disinfection time.

This large sterilizer is equipped with 3 pieces of 36W/75W/120W tubes.The device is equipped with a remote control and has 360-degree infrared human body sensing. The device can be started by pressing the power button. At this time, the timing time can be set, 30minutes as a level. After confirming the set time, the device will delay the start up operation for 30 seconds.

UV disinfection trolley disinfects approximately up to 70-200 square meters room area. There are numerous safety features built-in with 15/30/60mins timer.

UV disinfection trolley has numerous applications not just for hospitals but can be used in schools, play areas, hotels, clinics, homes, cinemas, buildings, food manufacturing companies and offices.

It quickly and effectively provides disinfection to all surfaces and air within minutes.

Lifting UV disinfection trolley is laboratory tested,used by hospitals,and  recommended by the doctors.

Specification Data:

This product is made of stainless steel, with its three-tube structures, the technical parameters are:

1. Power:36W/75W/120W×3
2. UV Wavelength:253.7nm or 185nm
3. Voltage: 110V/220V±10%
4. Frequency: 50Hz±10%
5. 0-1440min timer
6. Start-up delay 30s
7. Intelligent remote control
8. Intelligent 360- degree infrared sensing:during the sterilization,if a person or an animal breaks into the room and near by infrared sensor,the lamp will be off,automatically open left.

Function:

UV disinfection trolley is mainly used in the medical and hygienic units as well as the industrial section of food and medicines for the air sterilization.

Method of usage:

1. Clean the room before using UV disinfection trolley. 
2. Carefully place the UV disinfection trolley in the center of the room or on a spot where UV light can beam more things in the room.

3.Arrange everything found in the room to ensure they will be exposed to UV light. Place things that are touched more often closer to the system to maximize sterilization.

3. Plug in and set the timer 0-1440 minutes to the desired duration.The UV light will be on after 30 seconds Sterilization start,this allows the system operator to vacate the room. 
4. Description of remote control key: Add-up (View the cumulative timing feature); Reset(Clear cumulative timing); Timer (Adjust hours or minutes).

5. UV disinfection trolley will suspend and UV light will shut off if someone is around the machine.Then resume when people left.
6. It will generate smell after sterilization.It's perfectly natural.Please open the window to let the smell out after sterilization.

7.Every part is carefully tested beforehand, to make sure of any problem or leakage of electricity. US standard plug(3 pins) or EU standard plug(2 pins) or UK standard plug (3 pins) & wire installed in-order to avoid any electric shock.

Please switch-off after used and remove the plug from the socket.